Sanitary Sewer Decree FAQ
Frequently asked questions about the Sanitary Sewer Consent Decree
- What is the Sanitary Sewer Consent Decree?
The Sanitary Sewer Consent Decree is a settlement, approved by a federal judge, which formalizes an agreement between the U.S. Environmental Protection Agency (EPA), the U.S. Department of Justice (DOJ), the State of Maryland – Department of the Environment (MDE), and the City of Baltimore. The Consent Decree requires the City to address overflows from the City’s sanitary sewer system.
- Why does the sanitary sewer system overflow?
Sewers can become clogged by tree roots, grease, or other items that should not be flushed down the drain (e.g., wipes, diapers, plastic products, paper towels, etc.) Sewers can also develop cracks and breaks, which cause stormwater and groundwater to infiltrate the sewer system during wet weather. Finally, sewers can fail due to deterioration. These problems can cause sewers to overflow into waterways or even back up into basements.
- How is the City planning to address SSOs?
The Consent Decree prescribes a number of programs and construction projects that address SSOs and allow the City to close its structured overflows safely. The City is repairing or replacing broken or leaking pipes and other sanitary sewer structures; increasing the capacity of sewer lines by upsizing pipes and building storage facilities; constructing the Headworks project at the Back River Wastewater Treatment Plant to eliminate a hydraulic restriction in the sewer system; and implementing proactive inspection, cleaning, and enforcement measures throughout the sewer system.
- What can I do to help prevent SSOs?
Keep grease out of the sewers. Dispose of greasy and fatty foods, such as salad dressings, cooking oil, ice cream and sauces, in your garbage can instead of your sink or garbage disposal. Eliminate direct connections of roof leaders and sump pumps to the sanitary sewer system. Make sure there are strainers over all floor and sink drains. Do not plant trees or bushes near sewer lines – the roots from these plants can cause extensive damage to sewer lines. Do not flush rags, wipes, diapers, napkins, personal hygiene products or similar products down the toilet or drain –these are a major cause of backups and overflows. Have the line that connects your house with the public sewer line (called a sewer lateral) inspected, and install an external cleanout to provide access to your sewer lateral. Repairing broken laterals, which is the homeowner's responsibility, can keep stormwater from leaking into pipes, eliminate root intrusion, and prevent sewer backups into your home.
Review guidelines to help prevent sewer backups.- What should I do if I see a sewer overflow?
Immediately call 311.
DPW staff will be deployed to investigate, clean, repair, and take samples as needed. DPW will report the spill to federal, State, and local authorities.
Keep people away from the area of the overflow (typically a manhole).
This is especially important for children and pets that may play near the overflow area (e.g., streets, public parks, or local streams, creeks, and rivers).
Do not go near or touch the overflow.
If you do happen to come in contact with the sewage overflow, wash your hands thoroughly with warm soapy water before handling food or touching other persons or surfaces. Wash all clothing that came in contact with overflow.- What is a private sewer line? Does the City repair private sewer lines?
Your private sewer line is the underground sewer pipe that connects your plumbing to the public sewer system. The City does not repair or maintain private sewer lines. Property owners are responsible for replacing, maintaining, and repairing sewer pipes in their buildings and within their property lines.
- What is the best way to maintain private sewer lines?
Do not plant trees, shrubs, or bushes near sewer lines. Roots from these plants can enter, block, and damage sewer pipes. Do not dispose of fats, oils, or grease down sinks, toilets, or floor drains. Dispose of them in the trash instead. Fats, oils and greases (FOG) solidify inside drains and sewers and eventually create clogs. Do not dispose of diapers, napkins, wipes, rags, sanitary products, or similar products in your toilet or drain –these items block sewer lines and cause sewer backups and overflows, which release untreated sewage into our homes, neighborhoods, rivers, and streams.
- What is FOG?
FOG is a combination of Fats, Oils, and Grease used in food processing and the preparation of meals, including: cooking oil, fat, lard, grease, butter, tallow, shortening, margarine, meat, sauces, and pastries (e.g., cookies, cakes, pies, cupcakes, etc.).
- Why is FOG a problem?
FOG solidifies inside the sewer system causing obstructions and blockages in pipes, ultimately resulting in sewer overflows and backups. FOG also accumulates in pumping stations and wastewater treatment/storage facilities decreasing capacity and increasing maintenance requirements and operating costs.
- Why are overflows a concern?
Sewage overflows affect the quality of water in our streams, rivers and the Chesapeake Bay, can impact public health, and are unpleasant. Habitat for fish and other aquatic organisms is also degraded. Overflows are a significant source of E. coli bacteria in local water. If you swallow water with high levels of E. coli, you can become ill. Raw sewage also contains viruses and other pathogens. Sewer overflows also cause odors and leave unsightly sewer debris behind. Overflows are prohibited under the Clean Water Act.
- Are SSOs harmful? How do SSOs affect me?
Sewage contains bacteria, viruses, and other pathogens/pollutants that can cause disease and contaminate the environment. When untreated sewage enters local waterways, it degrades water quality, harms aquatic life, and makes our water unsuitable for primary contact recreation (e.g., swimming, wading, etc.) or re-use without treatment.
- Do stormwater and wastewater flow through the same pipes?
No – the City’s municipal separate storm sewer system (MS4) is an entirely separate system that carries un-contaminated stormwater and groundwater to surface water. Treatment in the MS4 is provided through a diverse variety of mechanisms under the City’s MS4 Permit, issued under the Clean Water Act. The storm sewer system is not a part of the sanitary sewer system. In contrast, many other municipalities and utilities throughout the United States operate combined systems that mix sewage with stormwater – those systems routinely overflow through combined sewer overflows (CSOs). Baltimore City has deliberated separated its sanitary sewer system and storm sewer system to eliminate CSOs.
- How will my community be affected by this work?
Sanitary sewer rehabilitation can be disruptive to the community in the areas of the project work. First, the sewer system must be inspected to assess its condition and develop a scope of work to rehabilitate the system. Streets or lanes may have to be temporarily closed to accommodate these activities. Once a scope of work is designed, the sewers must be physically rehabilitated. Rehabilitation may require the removal of old sewer lines, the installation of new sewers alongside the old lines, cleaning, cured-in-place pipe (CIPP), or similar techniques. While there are “trenchless” technologies that minimize the amount of digging required, you can still expect openings in streets and along curbs, along with large digging and hauling equipment, and heavy truck traffic. The City is committed to minimizing disruption as much as possible, and we will communicate with residents, businesses, commuters and other stakeholders to provide advance notice of any impacts.
- How are sewer improvements financed?
The City operates separate “enterprise funds” for its water, sewer, and stormwater utilities. By law, these enterprise funds must be financially self-sustaining, and are separate from the City’s general fund. In contrast to the general fund, the enterprise funds are not financed by tax revenue – rather, each enterprise fund is financed by charges that are reflected on your water bill. As such, the cost of maintaining and upgrading each utility is borne by the utility’s customers, who are also the primary beneficiaries of utility improvements. Sewer improvements are also financed by low-interest government loan programs such as the State Revolving Fund and Bay Restoration Fund. The City also applies for funding through grants and other programs, including the Water Infrastructure Finance and Innovation Act (WIFIA), which is managed by the Environmental Protection Agency. Unfortunately, the amount of funding provided by the federal government in recent years has declined relative to the financial requirements necessary to maintain and upgrade our aging infrastructure. To ensure adequate funding, the City also issues debt (e.g., bonds) to pay for capital improvements to the utilities. Repayment of these bonds is secured by projected revenues for the enterprise funds.